Bag of 100 TR414 tubeless tire snap in valve stems 1.5" long for .453" stem hole.
Bag of 100 TR414 tubeless snap in stems.These fit the standard .453" valve stem hole and are 1.5" long on the outside of the rim. These are 1/4" longer than the common TR413 and used when just a little more length is needed such as on wheels where the stem is recessed down in a hole on an alloy wheel. Not for use on TPMS applications or applications running over 60 psi operating pressure.
No customer reviews for the moment.
Bag of 20 TR801HP tubeless high pressure snap in stems for .625" stem hole.
TWO Large bore to standard bore tire valve adaptors.
TR218 replacement stem assembly for tractor tire and construction tubes. Includes base, plastic rim nut, and core housing with cap. FOR PROFESSIONAL INSTALLATION ONLY.
Bag of 100 TR418 tubeless tire snap in valve stems 2" long for .453" stem hole.
Bag of 100 TR413 tubeless tire snap in valve stems 1.25" long for .453" stem hole. This is the most common size.
Set of FOUR Dill VS-20 Rubber Snap In TPMS Stems. D shaped end with 3 flat sides and stepped screw.
Bag of 100 TR801HP tubeless high pressure snap in stems for .625" stem hole.
Bag of 20 TR602HP tubeless high pressure snap in long stems for the standard .453" stem hole.
Pack of TEN plastic rim nuts for TR218 tube stems
Set of 5 Dill 627 special domed tip plastic valve caps
Set of FOUR Dill VS-950S chrome sleeved Rubber Snap In TPMS Stems. Common double D sensor post end with two flat sides and two convex rounded sides.
Bag of 20 TR418 tubeless tire snap in valve stems 2" long for .453" stem hole.
Two new replacement complete valve core housings and rim nuts for TR218 fast fill air/water tube stems
Bag of 20 TR415 tubeless tire snap in valve stems 1.25" long for the large .625" stem hole.
TWO Large bore tire valve caps with core remover on top.
Package of 100 Hi Temperature Red Standard Tire Valve Cores
Bag of 100 TR414 tubeless tire snap in valve stems 1.5" long for .453" stem hole.
